| Title | Author(s) | Publish date |
|---|---|---|
|
SPFD Spray polyurethane foam supplier requirements Document: SPFD Spray polyurethane foam supplier requirements, Pages: 1-12 |
SPI | 01/1996 |
|
SPFD Spray polyurethane foam independent inspector requirements Document: SPFD Spray polyurethane foam independent inspector requirements, Pages: 1-20 |
SPI | 01/1997 |
|
SPFD Spray polyurethane foam elastomeric coating supplier requirements Document: SPFD Spray polyurethane foam elastomeric coating supplier requirements, Pages: 1-12 |
SPI | 01/1996 |
|
SPFD Spray polyurethane foam distributor requirements Document: SPFD Spray polyurethane foam distributor requirements, Pages: 1-8 |
SPI | 01/1996 |
|
SPFD Spray polyurethane foam contractor requirements Document: SPFD Spray polyurethane foam contractor requirements, Pages: 1-16 |
SPI | 01/1996 |
|
1998 SPFD Polyurethane Foam Insulation Systems Document: 1998 SPFD Polyurethane Foam Insulation Systems, Pages: 1-36 |
SPI | 01/1998 |
|
1995 SPI PFCD Thermal barriers for the spray polyurethane foam industry Document: 1995 SPI PFCD Thermal barriers for the spray polyurethane foam industry, Pages: 1-4 |
SPI | 01/1995 |
|
1995 SPI PFCD Maintenance manual for spray polyurethane roof systems Document: 1995 SPI PFCD Maintenance manual for spray polyurethane roof systems, Pages: 1-12 |
SPI | 01/1995 |
|
1994 SPI PFCD Spray polyurethane foam systems for new and remedial roofing Document: 1994 SPI PFCD Spray polyurethane foam systems for new and remedial roofing, Pages: 1-16 |
SPI | 01/1994 |
|
1994 SPI PFCD Moisture vapor transmission Document: 1994 SPI PFCD Moisture vapor transmission, Pages: 1-12 |
SPI | 01/1994 |
|
1994 SPI PFCD A guide for selection of elastomeric protective coatings over sprayed polyurethane foam Document: 1994 SPI PFCD A guide for selection of elastomeric protective coatings over sprayed polyurethane foam, Pages: 1-20 |
SPI | 01/1994 |
|
1993 SPI PFCD The roofing system that can stand up to high-wind disasters Document: 1993 SPI PFCD The roofing system that can stand up to high-wind disasters, Pages: 1-4 |
SPI | 01/1993 |
|
1993 SPI PFCD Factors affecting the field performance of spray applied thermal insulating foams Document: 1993 SPI PFCD Factors affecting the field performance of spray applied thermal insulating foams, Pages: 1-88 |
SPI | 01/1993 |
|
1991 SPI PFCD Glossary of terms common to the spray polyurethane foam industry Document: 1991 SPI PFCD Glossary of terms common to the spray polyurethane foam industry, Pages: 1-12 |
SPI | 01/1991 |
|
1991 SPI PFCD Glossary of terms common to the spray polyurethane foam industry Document: 1991 SPI PFCD Glossary of terms common to the spray polyurethane foam industry, Pages: 1-12 |
SPI | 01/1991 |
|
1989 SPI PFCD Spray polyurethane foam blisters - Their causes, types, prevention and repair Document: 1989 SPI PFCD Spray polyurethane foam blisters - Their causes, types, prevention and repair, Pages: 1-4 |
SPI | 01/1989 |
|
Spray polyurethane foam aggregate systems for new and remedial roofing Document: Book, Pages: 35 |
Polyurethane Foam Contractors Division / SPI | 01/1988 |
|
Factors affecting the field performance of spray applied thermal insulating foams Document: Spray Foam '93, Pages: 29-77 |
Mark Bomberg | 02/1993 |
|
Field performance of spray applied thermal insulating foams Document: Spray Foam '93, Pages: 9-28 |
Robert Alumbaugh | 02/1993 |
|
Stabilization strategies for weatherable polyurethanes Document: Polyurethanes Expo '96 Proceedings, Pages: 560-563 |
S Andrews; M Clauss; P Michaels | 10/1996 |
|
Sprayed polyurethane foam roofing overcoming aesthetic barriers Document: Polyurethanes Expo '96 Proceedings, Pages: 343-348 |
Tom Smith; Rene Dupuis | 10/1996 |
|
Silica additive systems for polyurethane and polyisocyanurate foams Document: Polyurethanes Expo '96 Proceedings, Pages: 334-342 |
M Okoroafor; W McDonald; A Wang; J Kresta; R Tabakovic; X Yao; K Ashida | 10/1996 |
|
Polyurethane system optimization for energy efficiency Document: Polyurethanes Expo '96 Proceedings, Pages: 328-333 |
Stanley Moore; Donald Ference | 10/1996 |
|
Modified castor oil a versatile polyol for rigid polyurethane foam applications Document: Polyurethanes Expo '96 Proceedings, Pages: 320-324 |
T Heinemann; H Scholl; R Welte | 10/1996 |
|
Influence of the level of monoalcohol species on the structure property relationship of polyurethane urea elastomers and sealants Document: Polyurethanes Expo '96 Proceedings, Pages: 287-304 |
P Kanub; D Gier; T Sanchez; D Bhattacharjee | 10/1996 |
|
Development of a sustainable roofing system spray polyurethane foam Document: Polyurethanes Expo '96 Proceedings, Pages: 2-7 |
D Benedict; A Mergner; M Knowles | 10/1996 |
|
Spray polyurethane foam roofing buyers check list Document: CL1 04/89 (AY-106, Pages: 4 |
Polyurethane Foam Contractors Division | 04/1989 |
|
Spray polyurethane foam systems for new and remedial roofing recommended design considerations and Guide Specifications Document: GS1 1/90, Pages: 27 |
Polyurethane Foam Contractors Division | 01/1990 |
|
SPF for building envelope insulation and air seal Document: GS4-9/92, Pages: 11 |
SPI / PFCD | 09/1992 |
|
A guide for selection of elastomeric protective coatings over SPF Document: GS1-5/94, Pages: 19 |
SPI / PFCD | 05/1994 |
|
Moisture vapor transmission Document: MVT-3/91, Pages: 11 |
SPI / PFCD | 03/1991 |
|
The renewal of SPF foam and coating roof systems Document: GS1-2/93, Pages: 11 |
SPI / PFCD | 02/1993 |
|
The renewal of spray polyurethane foam and coating roof systems Document: GS1-5/94, Pages: 11 |
SPI / PFCD | 05/1994 |
|
Thermal barriers for the spray polyurethane foam industry Document: GS1 8/95, Pages: 4 |
SPI PFCD | 08/1995 |
|
Maintenance manual for spray polyurethane foam roof systems Document: GSI 9/95, Pages: 12 |
SPI | 09/1995 |
|
Spray polyurethane foam systems for new and remedial roofing recommended design considerations & guide specifications Document: GS1-1/93, Pages: 30 |
Polyurethane Foam Contractors Division | 01/1993 |
|
Introduction to fundamentals of spray polyurethane foam and coating systems Document: , Pages: |
SPI / PFCD | 04/1995 |
|
A guide for selection of elastomeric protective coatings over spray polyurethane foam Document: , Pages: 19 |
Society of Plastics Industry | |
|
Performance criteria of rigid polyurethane foam roofing and coatings based on random sampling of aged roofs Document: , Pages: 327-334 |
D Kashiwagi; W Moor | 10/1989 |
|
Stereology: A technique for the quantitative characterization of foam structure Document: , Pages: 17 |
M Rhodes; B Khaykin | 09/1989 |
|
Determining if blowing gent concentration in cellular plastics Document: , Pages: 16 |
M R Ascough | 09/1989 |
|
The material spatial variability of gas filled cellular plastic foam insulation materials Document: , Pages: 18 |
Norman Low | 09/1989 |
|
Progress in evaluating long term thermal resistance of cellular plastics Document: , Pages: 26 |
F Edgecombe | 09/1989 |
|
Direct measurement of aged thermal resistance on rigid cellular plastics containing a gas with lower thermal conductivity than air Document: , Pages: 16 |
Ingvar Sandberg | 09/1989 |
|
ScalingfFactors in aging of gas filled cellular plastics Document: , Pages: 18 |
Mark Bomberg | 09/1989 |
|
The french prediction methods of the long term thermal resistance for gas filled cellular plastics Document: , Pages: 8 |
G Tramblay; G Roux | 09/1989 |
|
Aged thermal resistance of foams - an approach of a small, newer manufacturer Document: , Pages: 24 |
R R Divis | 09/1989 |
|
A method for evaluation the effect of blowing agent condensation on sprayed polyurethane foams Document: , Pages: 30 |
M Kumaran; M Bomberg; R Marchand; M Ascough; J Craezzo | 09/1989 |
|
A round robin testing program to estimate the precision of ASTM C518 for measuring the K-factor of rigid foam product Document: , Pages: 20 |
S Smith; J Lynch; M Moore; C Galbraith | 09/1989 |
|
Aging of CFC-based cellular plastics Document: , Pages: 20 |
R Kohonen; T Kiminki; E Kokko | 09/1989 |
|
An examination of some of the foundations of foam aging models Document: , Pages: 20 |
Dale Bandreth | 09/1989 |
|
Computer modeling of heat transfer through rigid polyurethane foam Document: , Pages: 18 |
G F Smiths; J A Thoen | 09/1989 |
|
Efficient computation of gas transfer phenomena through rigid cells insulating foam Document: , Pages: 30 |
A Demers; DuCause; G R deNazalle | 09/1989 |
|
Aging of cellular plastics: Creep and its effect on thermal performance Document: , Pages: 20 |
M H Collins; A R Lyle | 09/1989 |
|
Implementation of a constant - volume absorption technique for rapid measurement of gas diffusion and solubility in closed cell foam insulation Document: , Pages: 25 |
T R Brehm; L R Glisckman | 09/1998 |
|
R-value of aging of rigid foam insulation products Document: , Pages: 14 |
R J Booth; M P Drouin. | 09/1989 |
|
CFC alternatives emissions in thermoset foam production Document: Polyurethanes '90 Proceedings, Pages: 400-406 |
F Dwyer; G Knopeck; L Zwolinski | 10/1990 |
|
Novel polyisocyanurate oams for roofing and sheathing Document: Polyurethanes '90 Proceedings, Pages: 260-265 |
S Knis; D Ference; E Kennedy; D Bhattacharjee; S Dai | 10/1990 |
|
The technical viability of alternative blowing agents in polyiscoyanurate roof insulation Part 3: In-situ thermal aging and performance in different roof systems Document: Polyurethanes '90 Proceedings, Pages: 247-259 |
J Christian; G Courville; R Linkous; R Wendt; T Smith; R Graves | 10/1990 |
|
The technical viability of alternative blowing agents in polyisocyanurate roof insulation Part 2: Acceleration of thermal resistance aging using thin boards Document: Polyurethanes '90 Proceedings, Pages: 239-246 |
D L McElroy; R S Graves; F J Weaver; D W Yarbrough | 10/1990 |
|
The technical viability of alternative blowing agents in polyisocyanurate roof insulation Part 1: Processing and Physical Properties Document: Polyurethanes '90 Proceedings, Pages: 234-238 |
R H Blanpied; S A Knis | 10/1990 |
|
Are alternative blowing agents technically viable for polyisocyanurate roof insulation? Document: Polyurethanes '90 Proceedings, Pages: 232-233 |
G F Baumann | 10/1990 |
|
Polyurethanes Document: Polyurethanes '90 Proceedings, Pages: 639 |
VARIOUS | 10/1990 |
|
Air infiltration control Document: Report, Pages: 6 |
Polyurethane Foam Contractors Division | |
|
Glossary of terms common to the spray polyurethane foam industry Document: Report, Pages: 7 |
Polyurethane Foam Contractors Division | 03/1991 |
|
A guide for the spray in place application of rigid and semi-rigid urethane foam Document: Report, Pages: 4 |
Cellualr Plastics Division | 08/1972 |
|
Spray polyurethane foam blisters - their causes, types, prevention and repair Document: BL 1 - 1989, Pages: 4 |
Polyurethane Foam Contractors Division | 04/1989 |
|
Spray polyurethane foam aggregate systems for new and remedial roofing - recommended sesign considerations & guide specifications Document: GS3-6/90, Pages: 15 |
Society of Plastics Industry | 06/1990 |
|
Spray polyurethane foam for building envelope insulation and air seal - recommended design considerations and Guide Specifications Document: GS4-9/90, Pages: 9 |
SPI / PFCD | 09/1990 |
